remplacement des liens app-learninglab.inria.fr/gitlab par gitlab.inria.fr si...

remplacement des liens app-learninglab.inria.fr/gitlab par gitlab.inria.fr si possible + remplacement sessions01bis par session02

module2/ressources/emacs_orgmode.org

@@ -10,10 +10,10 @@
 and /A stub of replicable article/ explain how to set up
 emacs/org-mode for this MOOC. These are very important sections in the
 context of this MOOC. *These sections are illustrated in two
-out of the [[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session01bis/jump_to_id/9cfc7500f0ef46d288d2317ec7b037b4][three video tutorials of this sequence]], and* *which you
+out of the [[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session02/jump_to_id/9cfc7500f0ef46d288d2317ec7b037b4][three video tutorials of this sequence]], and* *which you
 really should follow carefully*. *Otherwise, you may have trouble doing
 the exercises later on*. Likewise, I strongly encourage you to watch
-the [[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session01bis/jump_to_id/9cfc7500f0ef46d288d2317ec7b037b4]["emacs and git" video tutorial available at the same place]].
+the [[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session02/jump_to_id/9cfc7500f0ef46d288d2317ec7b037b4]["emacs and git" video tutorial available at the same place]].
 
 The next section provides information on how to install emacs.
 
@@ -164,7 +164,7 @@ M-x package-install RET htmlize RET    # where M-x means pressing the "Esc" key
 #+END_EXAMPLE
 
 * A simple "/reproducible research/" emacs configuration 
-This section is illustrated in a [[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session01bis/jump_to_id/9cfc7500f0ef46d288d2317ec7b037b4][video tutorial]] (/"Mise en place
+This section is illustrated in a [[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session02/jump_to_id/9cfc7500f0ef46d288d2317ec7b037b4][video tutorial]] (/"Mise en place
 Emacs/Orgmode"/ in French). Watching it before following the
 instructions given in this section may help.
 
@@ -189,7 +189,7 @@ tar zcf rr_org_archive.tgz $FILE_LIST
 
 #+RESULTS:
 
-Then download [[https://app-learninglab.inria.fr/gitlab/learning-lab/mooc-rr-ressources/raw/master/module2/ressources/rr_org_archive.tgz][this archive]] and uncompress it. It contains the
+Then download [[https://gitlab.inria.fr/learninglab/mooc-rr/mooc-rr-ressources/rr_org_archive.tgz][this archive]] and uncompress it. It contains the
 following files and we will refer to them in the following:
 
 #+begin_src shell :results output :exports results
@@ -257,7 +257,7 @@ stored in a version control system like git. We leave it up to you
 to set this up but if you have any trouble, feel free to ask on the
 FUN forums.
 * A stub of a replicable article
-This section is illustrated in a [[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session01bis/jump_to_id/9cfc7500f0ef46d288d2317ec7b037b4][video tutorial]] (/"Écrire un article
+This section is illustrated in a [[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session02/jump_to_id/9cfc7500f0ef46d288d2317ec7b037b4][video tutorial]] (/"Écrire un article
 réplicable avec Emacs/Orgmode"/ in French). Watching it before
 following the instructions given in this section may help.
 
@@ -274,11 +274,11 @@ make -C replicable_article/ all ../replicable_article.tgz
 
 #+RESULTS:
 
-Download the following [[https://app-learninglab.inria.fr/gitlab/learning-lab/mooc-rr-ressources/raw/master/module2/ressources/replicable_article.tgz][archive]], uncompress it and simply =make= to generate the
+Download the following [[https://gitlab.inria.fr/learninglab/mooc-rr/mooc-rr-ressources/replicable_article.tgz][archive]], uncompress it and simply =make= to generate the
 article. You should then be able to open the [[https://app-learninglab.inria.fr/gitlab/learning-lab/mooc-rr-ressources/blob/master/module2/ressources/replicable_article/article.pdf][resulting article]]. This
 is summarized in the following command:
 #+begin_src sh :results output :exports both
-wget --no-check-certificate -O replicable_article.tgz https://app-learninglab.inria.fr/gitlab/learning-lab/mooc-rr-ressources/raw/master/module2/ressources/replicable_article.tgz
+wget --no-check-certificate -O replicable_article.tgz https://gitlab.inria.fr/learninglab/mooc-rr/mooc-rr-ressources/replicable_article.tgz
 tar zxf replicable_article.tgz; cd replicable_article; make ; evince article.pdf
 #+end_src
 
@@ -329,7 +329,7 @@ feel this is needed, you should follow the instructions from the
 official Web page: [[http://company-mode.github.io/][http://company-mode.github.io/]]
 *** Magit
 [[https://magit.vc/][Magit]] is an Emacs interface for Git. Its usage is briefly illustrated
-in the context of this MOOC in a [[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session01bis/jump_to_id/9cfc7500f0ef46d288d2317ec7b037b4][video tutorial]] 
+in the context of this MOOC in a [[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session02/jump_to_id/9cfc7500f0ef46d288d2317ec7b037b4][video tutorial]] 
 ("/Utilisation Emacs/git/" in French).
 
 It is very powerful and we use it on a daily basis but you should

module2/ressources/gitlab.org

@@ -24,7 +24,7 @@ GitLab.
 
 This document describes the software you need to have installed on
 your machine and how to handle authentication.  The "Configuring Git"
-section is illustrated in a [[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session01bis/jump_to_id/7508aece244548349424dfd61ee3ba85][video tutorial]] (in French).
+section is illustrated in a [[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session02/jump_to_id/7508aece244548349424dfd61ee3ba85][video tutorial]] (in French).
 
 Please read all these instructions carefully, in particular the one on
 "Configuring your password on GitLab".
@@ -88,7 +88,7 @@ step of changing your =~/.git-credentials= in the Jupyter environment
 (possibly several times).
 
 1. Get your default password using the [[https://app-learninglab.inria.fr/jupyterhub/services/password][Gitlab credentials retrieval
-   tool]] as described on the [[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session01bis/jump_to_id/7508aece244548349424dfd61ee3ba85][corresponding resource]].
+   tool]] as described on the [[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session02/jump_to_id/7508aece244548349424dfd61ee3ba85][corresponding resource]].
    #+BEGIN_CENTER
    [[file:gitlab_images/password_retrieval.png]]
    #+END_CENTER
@@ -106,7 +106,7 @@ step of changing your =~/.git-credentials= in the Jupyter environment
    #+BEGIN_CENTER
    [[file:gitlab_images/erreur405.png]]
    #+END_CENTER
-2. Access [[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session01bis/xblock/block-v1:inria+41016+session01bis+type@lti+block@05a0ce425f1741e5bee5049040f70529/handler/preview_handler][GitLab]]. 
+2. Access [[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session02/jump_to_id/5571950188c946e790f06d4bc90fb5f6][GitLab]] from the FUN plateform (click on "Accédez à Gitlab / Access to Gitlab" Button). 
 
    /Note: Again, you have to access Gitlab from the FUN platform
    otherwise you may get a 405 error/ /when trying to direcly open

module2/ressources/jupyter.org

@@ -76,7 +76,7 @@ to set up your own Jupyter on your computer and benefit from these extensions.
 Since the question was asked several times, if you really need to stay
 with SAS, you should know that SAS can be used within Jupyter using
 either the [[https://sassoftware.github.io/sas_kernel/][Python SASKernel]] or the [[https://sassoftware.github.io/saspy/][Python SASPy]] package (step by step
-explanations about this are given [[https://app-learninglab.inria.fr/gitlab/85bc36e0a8096c618fbd5993d1cca191/mooc-rr/blob/master/documents/tuto_jupyter_windows/tuto_jupyter_windows.md][here]]). 
+explanations about this are given [[https://gitlab.inria.fr/learninglab/mooc-rr/mooc-rr-ressources/blob/master/documents/tuto_jupyter_windows/tuto_jupyter_windows.md][here]]). 
 
 Since proprietary software such as SAS cannot easily be inspected, we discourage its use as it hinders reproducibility by
 essence. But perfection does not exist anyway and using Jupyter

module2/ressources/rstudio.org

@@ -84,9 +84,9 @@ of these documents:
 
 * Using Git from RStudio
 If you have never used git with RStudio, *we strongly advise that you
-follow [[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session01bis/jump_to_id/d132a854b0464ad29085cedaded23136][our tutorial on using git from RStudio]]* (/"RStudio et Gitlab"/
+follow [[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session02/jump_to_id/d132a854b0464ad29085cedaded23136][our tutorial on using git from RStudio]]* (/"RStudio et Gitlab"/
 in French). Before proceeding, make sure you also have followed the
-*[[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session01bis/jump_to_id/7508aece244548349424dfd61ee3ba85]["git/GitLab configuration" tutorial]]* (in French).
+*[[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session02/jump_to_id/7508aece244548349424dfd61ee3ba85]["git/GitLab configuration" tutorial]]* (in French).
 
 Alternatively, you may want to watch [[https://www.youtube.com/embed/uHYcDQDbMY8][this video]] (in English). If you
 do not like videos, you should have a look at the [[https://swcarpentry.github.io/git-novice/14-supplemental-rstudio/index.html][step-by-step
@@ -112,7 +112,7 @@ Open RStudio and do the following steps:
   [[file:rstudio_images/clone.png]]
   #+END_CENTER
 - If you're behind a proxy, git should be configured
-  accordingly. Check the [[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session01bis/jump_to_id/7508aece244548349424dfd61ee3ba85]["Dealing with proxies" section]].
+  accordingly. Check the [[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session02/jump_to_id/7508aece244548349424dfd61ee3ba85]["Dealing with proxies" section]].
 - Git will then connect to Gitlab and fetch a whole copy of the
   repository.
 - RStudio should restart in a mode related to Git:

module2/ressources/rstudio_fr.org

@@ -86,11 +86,11 @@ ne sont pas toujours à jour :
 * Utiliser Git avec RStudio
 La première chose à faire est de configurer Git sur votre
 ordinateur. Pour ce faire, vous pouvez suivre la vidéo
-[[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session01bis/courseware/66bc811404b8481da5f794de54681c5e/2419fd0fb6a0484988ca9d65497dcaaf/1?activate_block_id=block-v1%3Ainria%2B41016%2Bsession01bis%2Btype%40vertical%2Bblock%407508aece244548349424dfd61ee3ba85][configurer Git pour Gitlab]] (en français) et le document
-[[https://app-learninglab.inria.fr/gitlab/learning-lab/mooc-rr-ressources/blob/master/module2/ressources/gitlab_fr.org][Git et Gitlab]] correspondant (en français).
+[[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session02/jump_to_id/7508aece244548349424dfd61ee3ba85][configurer Git pour Gitlab]] (en français) et le document
+[[https://gitlab.inria.fr/learninglab/mooc-rr/mooc-rr-ressources/blob/master/module2/ressources/gitlab_fr.org][Git et Gitlab]] correspondant (en français).
 
 Vous pourrez alors utiliser Git avec RStudio. Pour ce faire, vous
-pouvez suivre la vidéo [[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session01bis/jump_to_id/d132a854b0464ad29085cedaded23136][RStudio - Gitlab]] (en français) dont les étapes
+pouvez suivre la vidéo [[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session02/jump_to_id/d132a854b0464ad29085cedaded23136][RStudio - Gitlab]] (en français) dont les étapes
 sont reprises ci-dessous.
 
 /(Nous vous signalons aussi cette/ [[https://www.youtube.com/embed/uHYcDQDbMY8][vidéo]] /(en anglais) ainsi que le/ [[https://swcarpentry.github.io/git-novice/14-supplemental-rstudio/index.html][tuto
@@ -117,7 +117,7 @@ Ouvrir RStudio et procéder comme suit :
   [[file:rstudio_images/clone.png]]
   #+END_CENTER
 - Si vous êtes derrière un proxy, il faut le définir dans Git (voir le
-  paragraphe "Gérer les proxy" de la page sur  [[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session01bis/jump_to_id/7508aece244548349424dfd61ee3ba85][Git et Gitlab]]).
+  paragraphe "Gérer les proxy" de la page sur  [[https://www.fun-mooc.fr/courses/course-v1:inria+41016+session02/jump_to_id/7508aece244548349424dfd61ee3ba85][Git et Gitlab]]).
 - Git se connecte à Gitlab et récupère une copie complète du dépôt.
 - RStudio redémarre dans un mode lié à Git :
   #+BEGIN_CENTER